ArtiTeq catalogue

Artiteq has selected the Fischer UX 5x30 R plug to be used in combination with its hanging systems. The Fischer UX 5x30 R plug can be used in different kinds of materials, such as concrete, stone and plasterboard. Depending on the material, the plug can support a maximum load of 30 kg. The drill used with the plug must have a diameter of 5 mm. The plug is 30 mm in length. The screw used with the plug is 38 mm long and has a diameter of 3.5 mm (to be used in combination with a PZ2 bit). To determine the maximum load of a signing hanging system, it must be known what type of mounting materials will be used and what surface (i.e. type of material) these will be attached to. The components of the signing hanging system all have a maximum bearing capacity. This is the maximum bearing capacity for the component itself and not the maximum bearing capacity that must be taken into account for the system as a whole. For the whole system, the load capacity that is recommended for the mounting material in combination with the respective base material, takes precedence. For every signing hanging system, the weight that you wish to hang must be balanced against the maximum load capacity of the mounting material. If systems are hung from other hanging components, such as recessed ceilings, you have to know the maximum load of this hanging component before fitting our systems. The tables below show the maximum load capacity for the Fischer plug in combination with different materials and the maximum bearing capacity for each component for the different signing hanging systems. TYPE UX 5X 30 1 Required safety factors are considered. 2 Valid for tensile load, shear load and oblique load under any angle RECOMMENDED LOADS IN THE RESPECTIVE BASE MATERIAL F REC 2) Concrete ≥ C20/25 [kN] 0,30 Solid brick ≥ Mz 12 [kN] 0,20 Perforated sand-lime brick ≥ KSL 12 [kN] 0,30 Vertically perforated brick ≥ Hlz 12 [kN] 0,20 Aerated concrete ≥ AAC 4 [kN] 0,15 Gypsum plasterboard 12,5 mm [kN] 0,10 Gypsum plasterboard 25 mm [kN] 0,10 Gypsum fibreboard (Fermacell) [kN] 0,20 Gypsum block ρ ≥ 0,9 kg/dm³ [kN] - ART. NO. DESCRIPTION MAX. LOAD CAPACITY 7807.060 Suspension bracket Xpo Rail 1,2 mm 15 kg 7807.200 Steelwire + slider 1,2 mm 200 cm black 15 kg 7807.210 Steelwire + slider 1,2 mm 200 cm nickel 15 kg 7807.100 Ceiling Bracket black C01BL 15 kg 7807.110 Ceiling Bracket nickel CO1NI 15 kg 7807.140 Ceiling Suspension auto grip 1,2 mm CS01NI 15 kg 7807.350 Steelwire 7x7 1,2 mm 10 m 15 kg 7805.052 Loop Hanger 1,0 mm - 1,5mm 10 kg 7807.120 Recessed Ceiling Clip 20 mm 5 kg 7807.130 Recessed Ceiling Clip 20 mm + suspension auto grip 1,2 mm 5 kg 7807.310 Steelwire + hook 1,2 mm 300 cm 15 kg 7807.010 Steelwire Hook auto grip 1,2 mm ST01BL 15 kg 7807.020 Steelwire Hook auto grip 1,2 mm ST01NI 15 kg 7807.030 Steelwire Hook auto grip 1,2 mm ST02NI 15 kg 7807.040 Steelwire Hook auto grip 1,2 mm ST03NI 15 kg 7807.400 Acoustic Spring 01-NI 5 kg 7807.050 Steelwire Clamphook auto grip 1,2 mm STC01NI 15 kg ARTITEQ.COM 127